Are You Prepared For These 4 Common Tank Truck Safety Risks?

  According to OSHA, loading and unloading liquids, especially those are combustible, is one the most dangerous tasks in any manufacturing or storage facility. Incorporating the proper safety equipment and procedures is key to helping your tank truck workers stay safe.

    Damaged suspension-type highway trailers that can’t support the weight of tank trucks may cause injuries during loading and unloading. But even if your trucks are in perfect working condition, other safety risks exist.

Consider these four tank truck safety risks and how your organization can mitigate them.

1. Falls

     Your workers may be hospitalized for fractures, head injuries and other serious problems if they fall from a tank truck. Even worse, their injuries may be fatal. In 2014, a tank truck driver backed his truck into the garage bay, exited the vehicle and climbed on top to vent the oil tanker compartments. He fell 10 feet to the concrete 䜫oor below and died the next day.

     Standard cages and gangways often are insufficient for protecting against falls. That’s why it’s important to speak with a workplace safety expert about a more effective fall prevention system. Installing equipment such as truck loading racks helps to reduce the risk of falls, but the best-fit safety solution depends on your site and specifications.

2. Trips

     Ensure you keep work areas tidy to prevent workers from tripping over equipment. While you may be under time pressure to load and unload your tank trucks, avoid sacrificing safety for speed. Leaving hoses out in the open could lead to employee injuries. Be sure to train your employees on proper safety procedures so they understand the risks of tripping over equipment and how to mitigate them.

3. Slips

     Slips often occur when there is not enough friction between a worker’s shoe and the floor surface. the following types of wet and dry floor contamination may lead to slips and injuries.

• Water
• Oil
• Grease
• Soap From Cleaning Solutions
• Dust
• Powders
• Granules

     Slips are especially common when a spill isn’t cleaned up immediately. In addition to cleaning up contaminants and ensuring no soap residue is left after cleaning, you can reduce the risk of slips by installing structural canopies to keep your loading equipment dry from rain water. As an added benefit, employees are able to work under more comfortable conditions when it rains.

4. Asphyxiation

     Confined spaces are dangerous for workers handling chemicals, so you must check air quality to protect lives. You should consult an air monitoring equipment provider to purchase a product that detects fumes. Your safety equipment provider also can advise you on fall prevention solutions that minimize the risk of employees falling into a tank (and drowning) when fumes are inhaled.
The best way to keep employees safe when working with tank trucks is to partner with a safety expert that understands the problems you face. After evaluating your risks, you and your safety equipment provider should work together to develop a custom safety system that suits your facility and processes.
Whether that means purchasing a combination of elevating truck platforms, truck cage safety and full truck enclosures, or designing an alternative solution, your system should be tailored to your risks and requirements.

How to Narrow Your Search for Flatbed Trailer Safety Solutions

If you’ve ever shopped online for flatbed trailer safety systems, you know there’s no shortage of solutions. It may seem daunting to narrow your options and find the ideal equipment for your site.
Unfortunately, it’s impossible to simply pick your safety solutions from a website. Consider the following types of equipment and ask yourself honestly whether you would be able to choose the precise models suited to your facility:

• Drive-off protection
• Warning lights
• Swing gates
• Flatbed tarping platforms
• Overhead tarping systems
• Canopy systems
• Complete terminals

Perhaps you read an article about swing gates or know that a competitor uses certain flatbed tarping platforms. But how do you know if the equipment meets your specific requirements? Learn how to assess your site’s needs and choose the correct equipment with the help of a safety expert.

Factors That Determine Your Ideal Safety Solution

Your flatbed trailer safety equipment must suit your site layout, processes and trucks. When you consult a safety expert, you should discuss the following factors to help narrow down your search for the right equipment.

Your Operators’ Work Procedures

An expert must understand your processes to identify equipment that won’t interfere with driving, spotting or loading/unloading procedures. The solution should enhance these processes.

Varying Truck Sizes and Configurations

Information about variances helps your expert identify solutions that don’t cause gaps, which a worker may fall through, and know whether your solution needs to be moveable.

Your Specific Product and Its Risks

Whatever you are loading onto your flatbed has its own unique hazards. For example, products that have round surfaces may roll around and must be safely secured.

Points of Access on Your Truck

Depending on what and where you are loading, you may face limitations on how you gain access to the flatbed. Your solution must provide access at feasible locations.

How You Will Spot Trucks To the Proper Location

Your safety solution is designed to a specific set of parameters. If the truck isn’t spotted properly, gaps between your truck and equipment may cause serious falls.

Your Internal Safety Standards

Some companies have standards that are far more stringent than OSHA standards. Your expert must be aware of your requirements so the solution matches them.

Industry Safety Standards and Best Practices

If your industry generally follows certain safety guidelines, and they are stricter than OSHA-mandated rules, the expert designing your solution should be aware of them.

Your Site Layout and Traffic Flow

Limitations at your facility, such as lack of space, may prevent certain safety solutions from functioning as intended. In this case, you would need a highly customized solution.

Power Limitations for Electric, Pneumatic and Hydraulic Equipment

Many safety systems move, and movement requires power. Your solution’s power requirements may impact your budget.

Your Unique Climate and Weather Conditions

An expert must consider how cold, heat, snow, ice, rain and other conditions affect your product and operation.

Load Height

Load height impacts your equipment decision. A drywall facility with tall loads requires different flatbed fall prevention equipment than a cement plant with low loads.
No safety solutions provider can accurately recommend equipment without understanding these parameters. An expert may have further questions after the topics here are covered, depending on what you discuss.
While safety risks at your facility may be pressing, avoid purchasing equipment without first confirming that it’s suited to your site. Instead, remove workers from hazardous areas until you find the correct equipment. If you’re searching for a way to revitalize your safety culture, look beyond product listings and delve deeper into your needs to identify impactful solutions.

For more information about this article and more useful information click Here. 

3 Approaches to evaluating your safety equipment needs

When choosing safety equipment for your facility, the stakes are far too high to trust a one-size-fits-all approach. In order to reduce your company’s risk exposure and maximize value, it’s best to work with a consultant or vendor who has the necessary expertise to tailor a safety solution to your unique situation.

There are many ways to evaluate your safety equipment needs, from reviewing your processes and operations with a variety of stakeholders to more rigorous methods, according to an OSHA publication on hazard analysis

Here are three approaches to consider

• Perform A Job Safety Analysis Or Job Hazard Analysis

Identifying your safety equipment needs starts with assessing your facility’s safety concerns, including any concerns that could arise in upcoming initiatives. To gather this evidence, conduct a standard step-by-step job safety analysis or job hazard analysis (JHA)

By gathering empirical evidence about safety hazards, you’re able to show measurable justifications for each of the safety issues you’ve identified. For example, you might use the number of breakdowns in the plant over a month as evidence of a specific safety issue.

• Focus On Value, Not Cost

When evaluating your safety equipment needs, it’s important to look beyond the cost of solving problems and consider how your facility could benefit by upgrading your equipment. To do this, make sure your assessment includes all known safety hazards as well as issues that aren’t necessarily negative. For example, you might consider how specific safety equipment and services would help your company achieve certain goals, such as adopting higher safety standards or becoming compliant with new internal standards.

Investing in the right safety equipment makes good business sense.It helps lower the risk of costly citations. It also helps reduce downtime due to accidents, which could drive additional productivity and throughput. Focusing on value instead of cost helps your company make sound decisions about safety equipment and determine the true value of investing in a comprehensive safety solution.

• Consider Your Employees’ Best Interests

From a business perspective, it’s important to calculate the costs of your current safety issues in hard numbers. You might express these costs in terms of lost productivity, such as, “This equipment failure is costing us X number of dollars per month,” or, “Workplace injuries are costing us X number of employee hours per month.”

But it’s important to take a step back from the numbers and remember that reducing or eliminating safety issues is about protecting the health and lives of your co-workers. No company wants to cut corners that could result in safety hazards, accidents or even deaths. A safe work site is an expression of the value of the people working there – and the values of the company.

Evaluating your safety issues early on makes it easier to communicate with a consultant or vendor, as you collaborate to develop the right safety solution for your company’s specific needs.

How to Improve the Safety of Your Rail Transloading Processes

Transloading between trucks and rail cars helps you lower transportation costs through affordable rail shipping, even if your origin site or destination is not along a rail line. However, the process of tank rail car loading and unloading can be dangerous. For example, workers may become lightheaded and faint if they inhale fumes from petroleum fuels.

Carbis Australia Rial trasloading safety solutions.

The manual labour involved in loading and unloading also presents a danger. Without proper equipment to improve the ergonomics of a task, workers may receive repetitive strain injuries.

Then, there’s the matter of the tank cars themselves. Workers may fall from a height if they climb on top and trip. Unsecured cars may also move unexpectedly and strike workers on the tracks.

While safety risks like these can’t be eliminated entirely, you can mitigate them. Learn more about how to protect your workers during rail transloading.

Follow Rail Transloading Safety Procedures

The Federal Railroad Administration has certain rules in place to keep workers safe during rail transloading. First, you must block at least one wheel per rail car against movement in both directions and set the hand brakes to keep cars in position. You may have to use multiple wheel blocks and hand brakes if more than one car is on a track.  During a product transfer, at least one employee must have an unobstructed view of the operation or an employee should be watching the operation on a monitoring system. That way, someone can immediately notify workers involved in the case of an emergency or malfunction.

• Keep headlights or warning lights on when operating a railcar mover
• Ensure the horn, bell and brakes work properly before moving the railcar mover
• Whenever possible, perform tank car transloading outside so fumes aren’t trapped indoors
• Prevent workers from placing their hands and body parts at a machine’s point of operation (use tongs, hooks or other tools instead)
• Always be prepared for the movement of rail cars and other equipment at any time, in any direction

Install the Appropriate Safety Equipment

A number of rail safety solutions help minimize workers’ ergonomic strain, prevent falls and improve your site’s safety. Consider speaking with a safety expert to learn whether the following solutions are right for your facility:

• Single or double-sided loading racks for safe access
• Crude oil loading racks with fixed platforms
• Transloading portable access platforms and carts
• Hand rail systems for the tops of railcars
• Fall prevention cages
• Mobile dual vehicle access systems with gangways
• Loading and unloading skid systems
• Bottom loading arms

Remember that equipment should be kept in good condition. Inspect equipment regularly, and never “field modify” it for uses other than those intended by the manufacturer. Modifications to improve equipment for its intended use should be certified in writing by the manufacturer.

With the right procedures and safety equipment in place, your company reduces the risk of serious injuries and fatal accidents. Plus, you demonstrate to your employees that their safety and livelihood are your top priority. You reap the economic benefits of rail transloading, and your workplace is more confident performing the task at hand.

For more information click here:

http://www.carbisaustralia.com.au/2543

4 Essential quality To Look for in marine Safety Equipment

Marine safety equipment is necessary for helping your workers access ships safely and preventing falls. Safer work conditions often increase deficiency and improve your bottom line.
While you may have an idea of what type of equipment you’re looking for, it’s important to not miss any important details. Always shop for safety equipment with the following four qualities:

1. Adaptable To Various Conditions

No two days at your marine facility are exactly alike. Whether you run into problems with limited dock space, variable water heights or obstructions blocking ship access points, you need safety equipment that’s flexible. Marine safety equipment must adapt to changing conditions within your work environment.
For example, the barges you’re working on and their access points may change throughout the day. Your safety solutions provider should give you the following mounting options to choose from in a barge gangway:
Float mode – As water levels rise and fall, your barge simply drifts under the gangway.
Pivot mounting – From one fixed mounting position, you can access several points on the barge.
Track mounting – Easily move your gangway up and down the dock to access multiple barges.
If you’re searching for a ship tower, you may benefit from one that features telescoping units, which provide extra versatility. Not only should your safety solutions be modifiable, but they also should be
custom fit to your needs.

2. Slip And Fall Resistant

Falling at a marine facility is dangerous due to the risk of drowning or being swept up in a current. While ship gangways are useful in preventing falls, ensure the gangways you choose include the following
features:

• Slip-resistant walk surface with angled cleats or treads
• Handrails that provide sturdy support
• Midrails that prevent workers from falling under the handrail

If using a gangway isn’t an option at certain areas of your site, use a marine ladder with heavy-duty swivel safety shoes and sizeable rubber tread to secure footing on a variety of surfaces. Your ladder will be much less likely to slip and lead to a fall from a height.

3. Made Of Reliable Material

Barge gangways, ship towers and marine ladders should always be made from high-quality materials. Aluminum is a strong, light metal that weighs about one-third as much as steel. When used in safety equipment, aluminum reduces dead weight while increasing load capacity. Ladders in particular
are much easier to maneuver when they’re made of aluminum.
Aluminum also increases the life span of your equipment due to its corrosion-resistant nature. It naturally generates a protective oxide coating. Your safety equipment provider may also use protective
treatments such as anodizing, painting or lacquering to extend the equipment’s life even further.

4. Environmentally Friendly

Spilling oil or other foreign materials into ocean water can be an environmental disaster. Not only do you endanger wildlife, but the EPA enforces the Clean Water Act After a spill, the EPA ensures you clean
up by:

• Negotiating with you to clean up the spill yourself, or
• Ordering you to clean up, or
• Having you pay for a third party to clean up

Some customers insist that their marine gangways use electrical power to avoid oil leaks from hydraulics. However, if you partner with a safety equipment provider that builds reliable solutions, your equipment is unlikely to leak. You may also choose to have a leak containment system installed with your equipment as an extra precaution.

As you work toward making your marine site safer, incorporate safety solutions that offer complete protection. You shouldn’t invest in equipment missing the qualities discussed above. Analyze your risks and prioritize mitigating those you’re exposed to first. Improving safety is an ongoing process that starts with making the right equipment decisions for your site.

For more information call us on 1300 763 444 or click here

How Truck Spotting and Safety Equipment Work Hand in Hand Prevent Fatal Injuries While Increasing Productivity.

You can’t have one without the other – proper truck spotting and fall prevention equipment are important parts of a comprehensive truck safety program. Without both of these components, you’re putting your workers at risk.

Between 2003 and 2012, 56 tractor trailer fatal injuries resulted from contact with a large object or equipment, and 28 deaths resulted from trips and falls. These figures from the U.S. Bureau of Labor Statistics demonstrate why you need well-trained workers directing drivers as they spot trucks within your facility and safety equipment that mitigates the risk of falls.

Do your truck spotting procedures work hand in hand with the right safety equipment to protect your workers?

Mitigate Risk With Accurate Truck Spotting

While fall prevention equipment saves lives when used properly, you must line up your trucks accurately with equipment for it to be effective. Otherwise, you leave gaps employees could fall through. You should also account for changing conditions and adjust procedures accordingly. For example, a new truck may have different access points to align with equipment.

Ultimately, how well a driver spots a truck is more important than any other safety solution. If you’re just beginning to improve your truck spotting, start by creating designated loading and unloading spots. Drivers should park there consistently.

You need a strategic method for spotting trucks that ensures proper alignment and prevents drivers from accidentally backing up into an employee. Follow these best practices recommended by OSHA

• Workers should use agreed-upon hand signals
• Spotters should keep visual contact with the driver
• Drivers must stop backing up if they can’t see the spotter
• Spotters and drivers must focus only on the task at hand
• Workers shouldn’t use phones, headphones or other distracting technologies
• Spotters must wear high-visibility clothing, especially at night

Truck spotting is not intuitive; it must be taught. Provide ongoing employee training to keep best practices fresh in mind.

Install Safety Equipment Suited To Your Procedures

Depending on your site and specifications, some safety equipment is more suited to your truck loading procedures than others. You should speak with an expert about how the following types of equipment fit your requirements:

• Track mounted gangways
• Swing gates
• Folding stairs
• Single hatch truck access platforms
• Bottom loading arms
• Manifolds
• Full truck enclosures
• Transloading portable access platforms
• Flat ramps
• Flatbed tarping platforms
• Overhead tarping systems
• Canopies systems

Many safety equipment models are flexible to your procedures. For example, track mounted gangways reduce the amount of time drivers need to spot and respot tank trucks. This safety solution gives operators access to multiple hatches without requiring drivers to move the vehicle from its initial location.

Ensure Truck Spotting And Equipment Work Together

You reduce the risk of improper spotting and accidents when you only have to spot a truck once. Your workers can take their time ensuring a truck is properly aligned with equipment. Plus, they increase efficiency and throughput with the added time savings.
Truck spotting and safety equipment must function together to be effective. If you spot a truck accurately in its designated space, a worker can still fall while loading or unloading without a fall prevention system in place. Conversely, fall prevention equipment doesn’t actually prevent accidents if truck and equipment access points aren’t aligned.
You have to understand your site procedures and the reason behind them when designing a comprehensive safety system. Learn about your risks and what prevents workers from safely accessing your trucks. With the right safety program, your company protects lives, complies with OSHA regulations and reduces expenses associated with employee injury.

For more information click HERE

4 Ways Weather Impacts your facility and Creates Workplace Safety Hazards

When you’re working on vehicles that frequently transport goods — such as rail cars, trucks, marine vessels and aircraft — throughput efficiency is a top priority. The amount of product that’s transported through your facility every day directly impacts your profitability.

However, when extreme weather conditions hit your facility, you’re faced with numerous safety hazards. Understanding how these hazards impact workplace safety and the challenges they present helps you better prepare for the future.

1- Ways Weather Impacts Your Facility And Workplace Safety

• Dangerous Work Conditions

Rain, snow, sleet, fog and even wind all create safety hazards when your employees are working on top of vehicles.
Snow, ice and rain are extremely dangerous for workers because it makes surfaces slippery. Even when your employees are being careful, they’re still at risk of a deadly slip or fall.
Extreme hot or cold weather also has an impact on your workers. Heat from the sun may lead to heat exhaustion, dehydration, heat stroke and more. Workers exposed to extreme cold are at risk of cold stress, frostbite, hypothermia and even death.
Here are a few tips for working in adverse weather conditions:

• When it’s raining, move slowly and carefully.

Workers have a tendency to speed up so they can get inside as quickly as possible. However, because surfaces are slippery, it’s more important to do the opposite. Slow down and take your time when performing tasks.

• Use the correct equipment.

Avoid using electrical tools that are not specially rated for outdoor use when working in the rain. Also, install safety equipment and facilities designed to shelter vehicles during the rain, and make sure that all surfaces are slip-resistant.

• Wear appropriate clothing.

Invest in personal protective clothing designed to work in conditions such as rain, snow and cold weather. Also, make sure you’re wearing clothing that allows you to be seen in the event of heavy fog, rain or snow. Bright colors and reflective clothing often work well in these situations.

2- Unsafe Driving Conditions

Extreme weather isn’t just dangerous for your workers during loading and unloading. It’s also a hazard for your operators driving the vehicles. Rain or snow creates slippery surfaces and increases the chances of an accident.
Although staying on schedule and increasing throughput efficiency are important, the safety of your workers always comes first. Take extra precautions, promote safe driving practices and provide training on how to operate a vehicle in various weather conditions.

3- Throughput Efficiency

When you’re forced to put production on hold, everything in your facility comes to a halt, leading to a significant decrease in throughput efficiency. This also impacts future loading and unloading schedules as well as your business’s profitability.
At times, however, this is unavoidable. While speeding up your production schedule may help with throughput efficiency, it puts your workers in a position where they may cut corners to speed up the process, which could lead to accidents and injuries.

4-Product Contamination

Adverse weather conditions such as rain, snow, dust and ice all have the potential to contaminate your product during loading and unloading. This leads to a quality control issue for businesses.
When hatches are open, it’s possible for rain, snow or dust to get into your vehicle. Product contamination is costly for your business, which is why it’s important to invest in safety equipment and facilities designed to protect vehicles from the elements.
Weather has a direct impact on workplace safety. When unexpected conditions hit, it’s important that you have procedures, policies and safety equipment in place to help keep your workers safe.

Link:

http://www.carbisaustralia.com.au/2391

Safe Access Solutions For Your Food And Beverage Facility

Your throughput depends on your ability to efficiently load and unload products at your food and beverage facility.

But without the proper safety equipment, these tasks become incredibly dangerous for your employees, and even the most experienced workers could be injured or killed.

Many companies fail to provide effective safety strategies and fall protection until a fatal fall occurs at their site. Although finding ways to reduce the risk of injuries is a constant challenge, it’s an important step in increasing safety and maximizing your bottom line.

Learn more about safe access solutions for food and beverage facilities along with the importance of safety training for your employees.

Safe Access Solutions for Your Food and Beverage Facility

Fall prevention equipment for food and beverage facilities is similar to that in other industries. When considering safety equipment for your facility, it’s important to work with a trusted vendor (http://www.carbisaustralia.com.au/contacts ) that can assess your facility and provide recommendations based on your needs and specifications.

However, the requirements needed to meet sanitation general practices are unique to food and beverage facilities. Each company has specific sanitary standards that must be considered when installing safety equipment.

Common safe access solutions for food and beverage facilities include:

• Safety cages
• Elevating platforms
• Safety racks
• Wash racks

How To Properly Train your Employees

Installing safety equipment is only the first step in working to prevent falls in your food and beverage facility. Training

Your employees on proper fall prevention is critical to improving safety, reducing the risk of injury and increasing throughput.

When conducting safety training for your employees, here are three important areas to cover:

1. Product-Specific Training

The products transported through your food and beverage facility often come in different shapes and sizes. It’s important to educate your employees on proper loading and unloading procedures for all products. This helps prevent spills or leaks, which may cause slips, trips and falls.

2. Fall Protection

Many sites don’t provide fall protection training for their employees, but it’s an important step in working to reduce injuries. Make sure your workers are trained to wear proper safety attire, such as hard hats secured with chin straps, and to use the fall protection and prevention equipment you have in place.

3. Site Conditions

Another important aspect of fall prevention is for your employees to understand the physical conditions of your work site. This includes the physical parameters and actual processes used at your loading and unloading site.

Train your operators on the logistics and flow of your site as well as the proper safety procedures for working in different weather conditions. This information should be communicated to your employees and your vendors.

Take a proactive approach to minimizing the risk of injuries and deaths at your food and beverage facility by installing safety equipment and implementing proper fall prevention measures.

5 Steps To Implementing A Fall Prevention Program

Fall Prevention Program

Learn How To Improve Workplace Safety

Workplace accidents have a devastating impact on your workers. From offset crashboxes to too much space between vehicles and equipment, your work site presents a number of safety hazards that shouldn’t be ignored.
Developing a fall prevention program is an important step toward reducing accidents and injuries at your facility. The goal of this program is to identify fall hazards in the workplace and develop procedures that help keep employees safe.

What To Include In Your Fall Prevention Plan

Your workers must be able to recognize the dangers of working at heights and understand how to avoid falls or other injuries. This may sound basic, but working at heights for any length of time becomes routine. Conducting training sessions is a great way to remind your employees of these dangers. Before developing a fall prevention program for your company, familiarize yourself with OSHA regulations regarding working at heights. Every facility is different, but here are some important topics to address:

• A description of workplace safety hazards
• How to eliminate these hazards
• Proper procedures for using safety equipment
• Safety procedures and workplace best practices
• Inspection, maintenance and storage procedures for equipment

Put this information in a manual and distribute it to all employees during training. Provide certification for all employees who read the handbook, complete training and demonstrate an understanding of workplace best practices.

5  Steps To Implementing A Fall Prevention Program

1- Bring Your Team Together
Before making changes to your fall prevention plan, bring your entire team together to discuss safety issues and areas for improvement. As your employees work on the floor every day, they’re likely to see hazards that you don’t. Keep an open mind during this discussion, and give everyone in your company a chance to provide their input.
2- Assess Your Work Site
After meeting with your team, conduct an audit of your work site. Walk around your facility and identify the following aspects:

• Safety equipment that’s currently in place
• Shortcomings of your equipment
• Fall hazards
• Old or worn-out equipment

During this time, don’t forget to check for process changes or changes in your bulk carriers that might keep your fall prevention equipment from fitting properly. These changes often lead to workarounds that aren’t safe for your workers and may hinder throughput.
3- Work With A Safety Equipment Vendor
Safety equipment isn’t one-size-fits-all. If you’re looking to install new equipment or update your current solutions, be sure to work with an experienced vendor.
Your vendor will help you assess your facility and make recommendations on the right equipment for your needs and safety procedures.
4- Develop A Safety Training Program
Based on discussions with your employees and safety equipment vendor along with OSHA regulations, develop a safety training program for your employees.
Training is a critical step when implementing a fall prevention program. All employees (and their managers) who are exposed to safety hazards on the job should go through training. Your training program should include regular in-person training sessions, a training manual and safety signs around your facility.
5- Communicate Changes With Your Team
After you develop your fall prevention program, communicate these changes to your team.
Rather than sending out a company-wide email, sit down with your employees to discuss all major changes, pass out training manuals and let everyone know when they can attend safety training sessions.
Accidents and injuries negatively impact employee morale, throughput efficiency and your bottom line. By implementing a fall prevention program, you’re actively taking steps to reduce the risk of accidents and improve workplace safety.

movable ladder platform

Safe, and reliable access onto tanker tops is a subject of increasing concern to all engineers and safety managers involved in the area of bulk liquid transfer. The Carbis mobile access cart, or TC10, is designed to provide drivers and operators with a flexible and safe access on to tankers of varying heights, either to sample or load product.

Constructed in either aluminium or carbon steel, these mobile platforms can be moved around a loading bay easily by one person or longer distances with a tractor. Wheels can be specified to run parallel to tanker for areas where space is limited.

TC 10 Ladder

Truck Loading platform, Portable Truck Access System, Loading Platform. Tanker Access Platform

Straight Truss Gangway

Provide non-permanent dock access.

http://www.carbisaustralia.com.au/wp-content/uploads/2014/06/GW500.jpg

Safely access a ship or barge from your dock.
Do you embark or disembark, ships, barges or tankers? Are you looking for a unit to carry on board so you are prepared for the next port of call? Do you need flexibility with the tide and variation in a ship’s empty and laden deck elevations? We understand each situation is unique – let Carbis help you choose what type of stage gangway will fit your needs and budget.

Our Straight Truss Gangways meet OSHA standards.

In your business time is money. Carbis can make sure your equipment safely provides the access you need – while keeping your operation up and running.

• Stage gangways come in many shapes and sizes to fit your diverse needs
• Rigid handrails provide a sturdy access from point A to point B, especially over longer distances or carrying a load
• Rope handrail design can help keep weight down for higher portability
• Curved tread models provide access to a wide variety of working angles for fall protection
• Can be equipped with rollers on the dock side, allowing your gangway to conform with the ship’s movement
• Optional slip resistant coating with angled cleats

Carbis’ gangways ensure fall prevention to keep your work force on the job and minimize downtime – ultimately leading to higher revenue.
Helps Fortune 100 Grain Company Tap Into New Revenue Stream
The grain company chose to partner with Carbis, the world leader fall prevention solutions that specializes in customized bulk loading access equipment and turnkey systems for truck, rail, and marine applications. Carbis was chosen as it was able to provide the grain company with a custom-designed solution that met the budgetary requirements for the project.
View Project
Helps Customer Make Way for the Mississippi
Cement manufacturer found itself in the position to relocate its barge loading facility, which included the moving of existing process pipe, the erection of a new pipe bridge, installing fall prevention equipment at all barge access points, and moving utilities from the existing facility to the new loading site.
View Project 

Hopper Car Handrail

Rail Car Safety Improved with Hopper Car Handrail Fall Prevention System from Sam Carbis and Carbis Australia

Operators need a safe, quick way to access all hatches at the top of the car.
It is important that operators can access all hatches on the top of rail cars in the safest way possible. The lifeline system solutions that are often utilized present several problems, however. They are time-consuming to implement, need frequent inspection, and are not very effective at preventing falls. With Rail Enclosures and Hopper Car Handrail systems from Sam Carbis and Carbis Australia, you can be assured that your personnel are safeguarded and that throughput will be improved at the same time as Rail Car Safety.
Safeguard your personnel and increase throughput with a full fall prevention system!

Sam Carbis and Carbis Australia provide full Hopper Car Handrail systems that are much more efficient and effective than lifeline systems. With full handrail systems, you can ensure that:

• Falls are prevented during access to coffin lids on the tops of cars
• Easy vehicle spotting is provided
• Operators maximize their job performance

Sam Carbis and Carbis Australia systems provide the ultimate in Hopper Car Safety for personnel who must access multiple hatches at one time.
Rail Enclosures and Hopper Car Handrail systems include:

• A self-leveling gangway that can be operated via pneumatic or manual procedures
• Complete 42-inch high handrail, midrail, and toeboard enclosure
• A lower edge that is padded to protect vehicles from damage

Wide Gangways

Wide Truck & Railcar Gangways from Sam Carbis Solutions Group, LLC Enhance Safety

Access gangways represent a critical part of any Fall Prevention Equipment inventory, and the Wide Gangways available from Sam Carbis and Carbis Australia offer even greater efficiency and safety when accessing trucks and rail cars. Wide Gangways offer the highest level of fall prevention for facility employees, and we can design Truck & Railcar Gangways to meet your unique specifications.

Wide Gangways provide a simple way to optimize and protect your loading/unloading environment. Because every facility is unique in some way, we can design and fabricate access gangways of varying widths ranging from 18 inches to the entire length of a vehicle.
Truck & Railcar Gangways from Sam Carbis and Carbis Australia help to:

• Increase accessibility to any vehicle
• Protect against the potential of mis-spotting
• Ensure ease of use via choice of available power options

Rely on Sam Carbis Solutions Group, LLC to customize Fall Prevention Equipment solutions that fulfill your specific needs.

Telescoping Ramp

Carbis Telescoping Ramp Eliminates Gaps during Vehicle, Hatch Access

Vehicles of Non-Standard Widths Easily Accessed with Telescoping Ramp
The need of operators to access a variety of vehicles, some of which have non-standard widths, can present safety problems for your facility. The major concern in such cases is the gap that often exists between the Truck Gangway or Rail Car Gangway and the vehicle during access procedures. A Carbis Australia Telescoping Ramp resolves issues associated with accessing smaller vehicles, since operators just push out the ramp extension and may leave the extension in position to access vehicles with larger widths as well. The Telescoping Ramp closes gaps during access, and operators can perform their duties in a much safer and faster way.

 Carbis Telescoping Ramp offers significant fall prevention features in cases where operators must load and unload vehicles of varying widths.
With a Telescoping Ramp, you will see:

• Elimination of gaps between gangways and vehicles of non-standard widths
• Easier handling of vehicles of all widths
• Greater safety in the workplace
• Faster access to trucks and rail cars
• Faster throughput in the loading facility

Your operators will enjoy an enhanced environment of safety with the Telescoping Ramp solution from Carbis Australia.

VARYING VEHICLE WIDTHS REQUIRE CARBIS TELESCOPING RAMPS

 

Loading, repair and shipping organisations can give their business a significant boost when they can perform work on any vehicle regardless of its shape or size.

However, it takes the right infrastructure to accommodate vehicles that come in varying widths. When an operation attempts to perform work on a non-standard size vehicle, it creates new fall hazards that could seriously jeopardise the operation.

Typically, gaps will open between the vehicle and the truck or rail car gangway. This puts workers in danger of falls or even crush-between accidents that could lead to costly downtime and medical expenses.

 

To remedy this problem, Carbis Inc. developed its Carbis Telescoping Ramps that can extend to reach even vehicles with the smallest width. Operators can extend the gangway with minimal effort, which will encourage them to make sure it fits snug with the vehicle during every operation.

The ramp comes with an adjustable tension spring that makes raising and lowering extremely easy. To further increase overall safety and keep accidents to a minimum, the platform is made with a slip-resistant walking surface.

What’s more, Carbis can design, manufacture and install these products so that they fit with existing loading and unloading infrastructure, and are compliant with any company requirements that are already in place.

The telescopic access gangway can be fabricated using either aluminium or steel, which can also be galvanised, primed, milled or painted. Stainless steel is also an option, and is ideal for any operation that needs to stand up to environmental rigours.

Further driving down costs, the ramp requires very little maintenance, and any repairs that must be made can be performed in the field.

Improving industrial safety, especially in shipping and loading operations, can lead to a much more productive workforce.

Carbis – Access Gangway